FUTURA srl – SPREADER MACHINE FOR THE COATING

PROFILE SPREADER MACHINE

for the coating of EPS profiles

SPREADER MACHINE FOR EPS COATING

For the coating of profiles in sinterized expanded polystyrene (EPS) or other rigid expanded materials, of various shapes,

with a maximum width of 600/800 mm and a maximum length of 2000 mm using an exclusive compound called FUTURA SCR.

Our spreader machine SC 803 is used for the coating of small and big profiles.
It is a very solid machine, made in aluminum to keep it light and resistant at the same time.
The technology of the machine allows producing more than 2m per minute, requiring the presence of only one person. 
The machines coats the Eps profile on 3 sides and it is possible to customize the templates; 

COATING MACHINE

 

 

 

 

 

 

You just have to send us the layout of the profiles that you want to coat!  

Regarding the material that has to be used with our spreader machine, there are three types of mortars, depending on the finishing that you want to obtain: 

1 – FUTURA SCR
2 – FUTURA SR FINE (smooth)
3 – FUTURA SCR EXTRA fine (extra smooth)

This material is a special polymeric mortar that does not contain cement.

For this reason, you can mix it and keep it in a closed bucket for about a month.
The difference between the three types depends only on the finishing:

FUTURA SCR is coarser and rougher,

FUTURA FINE and EXTRA FINE are smoother (EXTRA FINE’ color is light,near to white).

 

 

 

 

 

 

 

Have a look at the video!

https://www.youtube.com/watch?v=mibtrV5VpZs

 

For more information, have a look at the catalogues here below! 

 SPREADER MACHINE-min

POLYSTYRENE COATING – SPREADER MACHINE

  

comitec@comitec.biz